What are the requirements of the spraying production line for the processing environment

Spraying refers to the covering of protective or decorative layers on metal and non-metal surfaces. With the development of industrial technology, coating has been developed from manual to industrial automation, and the degree of automation is getting higher and higher. What are the requirements of the spraying production line for the processing environment?

The process using toxic, irritant and flammable substances shall be placed in a separate plant or in a specially separated section of the plant, and shall be equipped with personal protective equipment and fire-fighting equipment.

The workshop passage shall be equipped with facilities to eliminate passage wind to prevent the spread of fire, such as automatic fire doors, fire and smoke dampers, water curtains, etc.

When it is necessary to safely reach the work position above the equipment, an overpass with protective railings and stairs shall be installed. The workshop floor and overpass passage shall be paved with non slip floor.

There shall be no crossing points for stacking equipment, objects and wires on the pedestrian passage, and the width of the passage shall not be less than 1m.

When the assembly line runs over the working area, protective nets must be laid below to prevent objects from falling.

Excess paint and waste paint shall be stored separately in a special paint warehouse.

Where the solvent volatilizes greatly, a gas gathering device must be installed to prevent the diffusion of toxic gas; The demand for soft environment can not be ignored. Wear appropriate masks and gas masks during work and take good ventilation measures.